How to boost a mobile phone signal in the office?
In our age of advanced high technology, it is impossible to imagine life without a cell phone or the IInternet.
Although today mobile communication seems accessible to everyone, its quality may upset you. The signal is often weak due to thick concrete walls or a basement. Therefore, almost every office has a cell phone signal booster for comfortable working.
One of the most common complaints from mobile operator customers is the increased number of calls dropped before they’ve had a chance to say at least a few words. The first reason for this phenomenon is the location of one of the two telephones in an area where there are not enough radio waves to continue the communication; the network is oversaturated, so the call is dropped.
The second reason for these call failures is poor signal reception, when the phone is out of range of the mobile operator’s antennas, an active call cannot be picked up through another operator’s network, which causes the call to end.
Sometimes the signal may be very weak due to the fact that the signal station is located far from your office or building. But even in this situation, there is a great solution at UCtel!
It can provide cell phone signal booster for any objects you want:
- nightclubs, restaurants and cafes;
- country houses, cottages, dachas, etc.
High quality and reliable equipment from UCtel will work for you for your success. We know how important it is to ensure effective and reliable communication in the world of business and commerce. A missed call can cost you dearly and even damage your reputation!
Every message, call or e-mail sent is of fundamental importance, whether it is communication between employees, partners or customers. Your GSM network with optimum reliability can help you close deals and generate ideas.
What are the main reasons for a weak signal?
There are several reasons for the disappearance of the cellular signal. In the city, the main problem can be the thick walls of buildings made of glass, brick or reinforced concrete creating a “screen” when passing radio waves. Even a large number of base stations in large cities are not able to provide 100% coverage of the entire territory.
If we talk about the countryside, problems may arise due to long distances to base stations, significant weakening of the radio signal is possible, the presence of natural obstacles (forests, hills) is also of great importance for the passage of the radio signal.
There is no doubt that different consumers may need an amplifier. A person living in a rural area, in an area with little or no mobile network coverage, will obviously find such a device very useful. However, other scenarios may justify the purchase of such equipment. In particular, there are signal amplifiers for GSM mobile communications. This means that they can be transported and do not need to be fixed like traditional amplifiers. They can be very useful, for example, to equip a motorhome or a boat.
Everyone is familiar with the situation when during an important conversation the connection is suddenly interrupted due to an insufficient signal level or the presence of “dead zones” in rooms where mobile communication is completely absent.
To amplify the signal of a cellular network, it is advisable to use a gsm amplifier, which works on the principle of repeating the signal received from the base tower.
An external antenna is installed on the roof of the building or its facade, which receives the signal from the base tower of the mobile or Internet operator and transmits it to the heater (repeater, mobile repeater / Internet connection). Here the signal is amplified and transmitted via coaxial cable to the internal antenna, which distributes the signal to consumers – subscribers.
Cellular signal booster usually includes:
- external antenna – to boost the phone signal;
- internal antenna;
- signal repeater directly;
- N-type cable and connectors.
GSM signal boosters work in duplex mode, the number of simultaneous calls is unlimited. The use of this device does not require special coordination with mobile phone operators.
The signal from your device is transmitted in the same way to the cellular operator. The internal antenna provides cellular signal coverage inside the building. In turn, signals from cell phones inside the building are received by the built-in antenna and transmitted via the repeater and the external antenna to the operator’s base station. Power splitters are required to connect additional indoor antennas to increase coverage. The radio frequency cable is intended for connecting all the elements of the cellular communication amplifier to each other. Cable length is limited by signal attenuation. Depending on the brand of the cable and the installation of the system, the durability and reliability of the “cellular amplifier” depends on it.
It is recommended to perform a trial run first. It is important that there is no interference between the antennas. If the room antenna is installed too close to the external antenna, the repeater will turn off. Make sure, for example, that the room antennas are not installed too close to the window.
There is no doubt that you need to make sure that the external antenna is installed correctly. That is to say as high as possible in the direction of the relay antennas. Otherwise, the signal cannot be received optimally. Therefore, the GSM mobile network does not have optimal amplification.
In addition, mobile signals, i.e. the GSM network through which calls pass as well as 3G and 4G LTE mobile Internet use frequency bands. There are several that operators share. Therefore, before choosing a signal booster, you should find out about the frequency bands used by your carrier in the area where the repeater is deployed.
A cell phone signal booster will definitely help you solve all network and internet problems in your home. Moreover, this service is capable of increasing workflow productivity if you are going to use it in the office.
Follow Reader’s Digest news by subscribe to our weekly newsletter.